Vanquish 08350 Currie Portal F9 Scx10-Ii Front Axle Black Anodized

Description

Currie F9 Portal Front Axle for SCX10-II based vehiclesThe F9 Portal axles create extreme amounts of ground clearance under the center of your axle, increasing the clearance by 1/2"+ (13mm). This provides the equivalent of a tire over 1 inch taller than what is on your vehicle. The advantage of the Vanquish Currie F9 Portals is the gear reduction inside the portal (1.67:1) which can be adjusted with optional gear sets (1.4:1 Overdrive). By adding reduction at the portal, less torque is transferred through the other upstream components in the drivetrain. These axles are a direct replacement to any Axial AR44 axle, using all stock links. These axles come with all parts needed to assemble a full front axle. FeaturesPortal box built into the included knuckle with bolt on high steer arm for double shear mountingGear reduction in the portal of 1.67:1 (18/30), Optional Overdrive Ratio of 1.4:1 (20/28) recommended for use in front axle only.Included Vanquish AR44 machined gear setOverall axle reduction of 6.26:1 with stock portal ratio13mm increase in ground clearanceSpecifically design offset C-hubs is machined into the housing for strength, durability, clearance and scale appearanceHex to hex width of 7.66 inches, only roughly 5mm wider than a stock AR44 axle with a narrow hexReplaceable Chromoly threaded inserts used at knuckle and C-hub to ensure a stripped thread doesn't ruin your investmentBrass knuckle bushing from the AR60 axles are used in place of SCX10-II sized for more durability.Chromoly AR60 size VVD axle shafts come preassembledChromoly stub shafts with 6mm design at the drive pin which tapers down to a 5mm thread for ultimate strengthChromoly spoolAluminum 12mm hex with set screwCompatible with stock SCX10-II Chassis mounted