FreudLU96R010: 10" x 80T Thin Kerf Double Sided Laminate/Melamine

• Specs: Arbor 5/8", Diameter 10", Grind TCG, Hook Angle -3°, Kerf .091", Plate .071", Teeth 80.
• Premium TiCo HI-Density Carbide Laminate Blend for Maximum Performance.
• Triple Chip Grind (TCG) Tooth Design with a positive hook angle for long life in production applications.
• Thin Kerf requires less power and allows for faster feed rate.
• Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up..

Product Description ------------------- 10" Thin Kerf Double Sided Laminate/Melamine .com ---- The 10-inch Freud LU96R010 Thin Kerf Double Sided Laminate Cutting Saw Bladeis designed to make quick, smooth, chip-free cuts when working with laminates, melamine, and veneered plywood. It features Freud's Perma-SHIELD coating, and a triple-chip tooth grind, the long-term dependability of TiCo high-density carbide, and a series of laser-cut, anti-vibration slots. Triple-Chip Grind and Negative Hook Angle for Chip-Free Laminates Built to leave a high-quality, chip-free finish on both the top and the bottom of double-sided laminates and sheets of melamine, this blade features 80 teeth with a triple-chip grind. The blade's teeth also feature negative hook angles, which further reduces the possibility of chipping and helps ensure maximum tooth life. And the blade is so effective that there's no need to use a scoring blade with it.This blade is designed for optimal performance when cutting laminate or melamine that ranges from 1/4 to 1-5/8 inches in thickness. It's also a solid performer when crosscutting wood or working with plywood and chipboard. This blade can even rip wood, and it can tackle thinner or thicker materials. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.091 kerf. And, since it's a thin-kerf blade, it requires less horsepower than standard carbide blades to produce a quality finish, and it supports faster feed rates. Well-Balanced, Anti-Vibration Design This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade. High-Density Carbide for Maximum Cutting Performance This laminate saw blade's 80 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "laminate blend." Formulated to extend tooth life in the face of work with laminates, melamine, and solid surfaces, this blend is extra hard--due to the proportion of high density tungsten carbide that goes into it--and it still offers the mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo. With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening. and will hold up longer--saving you time and money. Perma-SHIELD Coating Reduces Friction and Heat Buildup Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp. As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster. This industrial saw blade is backed by Freud's limited lifetime warranty. About Freud: A History of Innovative Manufacturing An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt. By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more. What's in the Box Freud LU96R010 Thin Kerf Double Sided Laminate Cutting Saw Blade--10-inch diameter, 5/8-inch arbor, 80-tooth design. P.when('A').execute(function(A) { A.on('a:expander:toggle_description:toggle:collapse', function(data) { window.scroll(0, data.expander.$expander[0].offsetTop-100); }); }); From the Manufacturer --------------------- 10"x80tooth industrial thin kerf double side laminate blade TCG See more ( javascript:void(0) )